What Is a Fake Rolex 116610LV?

A fake Rolex 116610LV is a replica of the Rolex Submariner Date 116610LV, the green dial and green ceramic bezel steel diver that Rolex built from 2010 to 2020 and collectors nicknamed the Hulk. Copies range from $60 toy-grade watches to $500+ builds that reproduce the case, bracelet, dial, and movement.

The reference number matters. The 116610LV has a 40mm case, a green sunburst dial, a green ceramic bezel insert, and the calibre 3135. Its replacement, the 126610LV, uses a 41mm case and a black dial, so photos of the two get mixed up all the time.

Which Replica Tiers Exist for the 116610LV?

Sellers group 116610LV fakes into three broad tiers, and price tracks parts quality more than brand names. Ask which factory built the watch before you ask the price.

• Budget ($50-$150): 316L steel case, painted bezel markings, mineral glass, and a low-beat automatic or quartz movement. The bezel green is flat and the date sits under a weak cyclops.
• Mid tier ($200-$350): 316L or 904L steel, ceramic insert with painted numerals, sapphire crystal, and an A2836 or 2824 clone movement. Solid for daily wear, with flaws visible up close.
• High end ($400-$700): 904L steel case and bracelet, ceramic insert with platinum-filled engraving, AR-coated cyclops at 2.5x, and a clone 3135 movement. This tier is what buyers mean by a super clone.

Two watches from the same tier can still differ. Factories revise cases, dials, and inserts between batches, so a 2021 build may not match a 2024 build of the same model.

What Movement Sits Inside a 116610LV Replica?

Four movements cover most of the market: the A2836/2824 (cheap, sturdy, wrong beat rate and wrong crown height), the SA3135 (decorated, fragile), the SH3135 (better finishing, accepts some genuine parts), and the VR3135 (closest to the calibre 3135 layout, with a free-sprung balance).

Movement choice decides two things you can see. A 2824-based watch pushes the crown to a different height than a 3135-based watch, and the date flips with a different motion. Compare side-on photos of the case flank if that detail matters to you.

How Do You Spot a Fake 116610LV?

Start with the bezel, the date window, and the bracelet fit. Those three areas expose most replicas within seconds.

Bezel insert

The genuine insert has numerals filled with platinum and cut deep, so the metal sits below the ceramic surface. Cheap fakes paint the numbers on top of the ceramic. Under a loupe, genuine markings look matte and recessed while paint looks glossy and raised.

Color is the second tell. Genuine Hulk inserts shift from bright green in sunlight to dark olive indoors. Most fakes hold one shade.

Cyclops and date

The cyclops magnifies the date 2.5x on the genuine watch. Many fakes run 1.5x to 2x, so the date looks small. Check the black hole effect as well: genuine AR coating makes the date window read dark at an angle.

Case, lugs, and end links

Look at the gap between the end links and the lugs. Genuine 116610LV bracelets sit flush with no visible gap and no rattle. Fakes show a step, a wobble, or a gap on one side, and crown guards that taper into the case with a hard edge.

Dial and rehaut

On the sunburst green dial, light should sweep across the surface without banding. The rehaut engraving (ROLEX repeated around the inner flange) must line up with the minute markers. Misaligned rehaut text is one of the easiest tells to catch in photos.

Weight and feel

A full steel Submariner on its bracelet sits near 155 grams. A 316L copy often lands 10 to 20 grams lighter. Weight alone proves nothing, but it narrows the field fast.

What Should You Pay for a 116610LV Replica?

Prices cluster by tier, not by seller marketing. Expect $50-$150 for budget builds, $200-$350 for mid tier, and $400-$700 for a high-end 904L build with a clone 3135 movement. Prices above $800 rarely buy better parts.

Shipping, customs risk, and warranty add cost on top. A seller who offers no water-resistance test and no movement warranty is not worth a premium.

Is a Fake 116610LV Water Resistant?

Assume no. Factory gaskets on replicas are thin, and cases do not get pressure tested before shipping. Most sellers rate their watches at 30m to 50m, which covers splashes and rain, not swimming. If you plan to swim, have a watchmaker pressure test and reseal the case first.

How Does the 116610LV Differ From the 126610LV?

The 116610LV has a 40mm case, a green dial, and the calibre 3135. The 126610LV, sold from 2020, has a 41mm case, a black dial, and the calibre 3235. Buyers who search for a Starbucks Submariner want the newer reference, while the Hulk name belongs to the 116610LV.

How Do You Vet a Seller Before Buying?

Parts lists are easy to fake, so the buying process carries as much weight as the watch itself. Ask for these items before you send money.

• QC photos of the exact watch, including case back, clasp code, and a lume shot.
• A photo of the movement with the case back removed, not a stock image from a catalog.
• Written warranty terms and a clear definition of what counts as a defect.
• A payment method with a dispute route. Wire transfers and gift cards leave you with no recourse.

Wholesalers who supply resellers quote tier pricing by quantity. Single-unit buyers pay retail tier prices, which is normal.

Quick Answers About the Fake 116610LV

What is the best fake 116610LV?

The builds with a 904L case, a ceramic insert with platinum-filled numerals, a 2.5x cyclops, and a VR3135 movement come closest to the genuine watch. Factory names change, so judge the parts list rather than the label.

How much does a fake Hulk cost?

Budget copies run $50-$150, mid tier runs $200-$350, and high-end super clones run $400-$700.

Can you spot a fake 116610LV from a photo?

Sometimes. Bezel engraving depth, cyclops magnification, end link gaps, and rehaut alignment all show up in a sharp side profile or a close-up. A blurry wrist shot tells you nothing.

Do replica 116610LV watches use real ceramic bezels?

Mid tier and high-end copies do use ceramic inserts, though the ceramic mix and the engraving depth differ from the genuine part. Budget copies use painted metal or plastic inserts.