What is the fake Rolex Cellini Moonphase?
A fake Rolex Cellini Moonphase is a replica of reference 50535, the 39 mm Everose gold dress watch Rolex introduced in 2017. Replicas copy the white lacquer dial, the blue enamel moon disc with its meteorite applique, and the crescent-tipped date hand at 3 o'clock. The moonphase itself sits in a subdial at 6 o'clock and tracks the 29.53-day lunar cycle.
How does the moonphase complication work in a replica?
A moonphase is a geared disc that completes one turn every 29 days, 12 hours, and 44 minutes. Replica makers drive it with a 59-tooth wheel paired to a reducer module, so one full rotation covers two lunations. The display looks correct on the wrist, though most replicas drift faster than the genuine caliber because the module gearing and disc printing are less precise.
What movement is inside a fake Cellini Moonphase?
Entry replicas use a 21-jewel automatic with a stamped moon disc that snaps instead of advancing gradually. Mid and high tier builds use an ETA 2824 or Seagull ST21 base with an added moonphase module, and a few factories now offer a decorated 3195-style clone. The genuine caliber 3195 runs at 28,800 vph with a 48-hour power reserve and Superlative Chronometer certification.
How accurate is the moon disc on a replica?
- Cycle tracking: a working module rolls the disc one position roughly every 24 hours, matching the synodic month within a day or two per cycle.
- Long-term drift: genuine moonphases need correction about once a century, while replica modules can slip a full day every few months.
- Visual accuracy: the moon applique should sit centered in the aperture at every stage of the cycle.
Which details separate a good replica from a bad one?
- Disc finish: the moon should read as a pale metallic applique on deep blue enamel, not a printed sticker.
- Date hand: the crescent tip must align exactly with the printed numerals around the dial edge.
- Case heft: Everose replicas are usually 316L steel with rose gold plating or PVD, so a tungsten mid-case adds realistic weight.
- Corrector: a recessed pusher on the case flank should advance the moon disc one clean click at a time.
How much does a fake Rolex Cellini Moonphase cost?
Prices run from about $150 for a basic 21-jewel build to $700 and $1,200 for a top-tier automatic with a functioning moonphase and thicker gold plating. Above that range, you are paying for finish work rather than better mechanics. Ask the seller which movement and plating method are used before ordering.
How do you set and maintain it?
Set the moon disc while the watch is running and the hands are outside the 9 p.m. to 3 a.m. date-change window, using the corrector instead of the crown. A mechanical moonphase stops when the movement winds down, so expect to reset the disc after a few days off the wrist. Wipe the case dry after contact with sweat, sunscreen, or chlorinated water to protect the plating.
Is buying a replica Cellini Moonphase legal?
Selling counterfeit watches is illegal in the United States under trademark law, and shipments can be seized by Customs. Buyers should weigh that risk before ordering, and no replica should ever be presented as a genuine Rolex.