The replica Omega Caliber 9800 is a clone automatic movement paired with a stainless steel case built to mirror the look and feel of Omega's modern twin-barrel caliber family. In short, it delivers the open-caseback visuals and smooth winding that buyers look for, at a fraction of genuine pricing. This guide covers the movement, the case specs, and what to expect on delivery.
Key Features
- Clone automatic movement with twin mainspring barrels for a stable, longer power reserve
- Bi-directional winding rotor finished with Geneva stripes and engraved branding
- Co-axial style escapement layout visible through the display back
- 41 mm brushed and polished 316L stainless steel case with twisted lugs
- Domed sapphire crystal with inner anti-reflective coating
- Ceramic bezel insert with recessed, lume-filled markers
- Screw-down crown and caseback rated for everyday water contact
- Quick-release bracelet plus interchangeable leather strap options
Materials and Specifications
Each example is assembled in a 316L stainless steel case measuring about 41 mm across and roughly 13 mm thick, with a 20 mm lug width that accepts most aftermarket straps. The front crystal is sapphire with an anti-reflective coating, and the display back is sapphire as well, so the movement finishing stays visible. Hands and hour markers are applied and filled with lume for low-light legibility, and the bracelet uses solid links with a signed clasp.
Shipping and Returns
Orders ship discreetly in plain outer packaging with tracked delivery and no branding on the label. We inspect and time each piece before it leaves the warehouse, and returns or exchanges are accepted within the stated inspection window if the watch arrives with a fault. Movement warranty coverage is included on every unit.
How accurate is the replica Omega Caliber 9800 movement?
Well-built clones typically run within about plus or minus 15 to 25 seconds a day out of the box, which is normal at this tier. A quick regulation by any local watchmaker usually tightens that considerably.
Can you see the difference through the display back?
At a glance, no, the striped finishing, rotor engraving, and balance layout read correctly. Under a loupe, engraving depth and jewel settings are the usual giveaways.
What should I check when the watch arrives?
Wind it fully, set the time, and let it run for a day before judging accuracy. Check crown threading, bezel alignment, and that the bracelet screws are tight.